Hinada----Provide the truly integrated solution to water and wastewater project.
Product Specifications:
Application: include power generation, metal finishing, electronics fabrication, and more.
5000LPH Pure Water EDI System electrodeionization
Feature: Reverse osmosis and electrodeionization technology
no regeneration chemicals required.
Worldwide Support.
Cost-Effective.
Packaged Systems.
10 Years of Experience.
When fed with low total dissolved solids (TDS) feed (e.g., feed purified by RO), the EDI System output can reach very high purity levels (e.g., [[Purified water/ Electrical Conductivity|18 megohms/cm], Resistivity / Conductivity Measurement of Purified Water. The ion exchange resins act to retain the ions, allowing these to be transported across the ion exchange membranes.
The main applications of EDI technology, are widely in electronics, pharmaceuticals and power generation.
Input water quality standards
In order to make sure the best treatment of the EDI System, It’s better the input water quality meets the below table :
| Raw Water | Output of RO System, the Conductivity ≤ 10 μ/ cm |
| PH value | 6.5—7.5 |
| Temperature | 5℃–38℃ |
| Working Pressure | 0.15—0.4MPa |
| Hardness | ≤1ppm(Take CaCO3 as sample test) |
| organic matter | TOC <0.5ppm,it’s better none |
| Oxidant | active chlorine（Cl2）< 0.05ppm；
ozone（O3）< 0.02ppm |
| Heavy metals | ions < 0.01ppm (including Fe, Mn) |
| Silicon | < 0.5ppm(by SiO2 ) |
| CO2 | CO2< 3ppm, if the CO2 > 3ppm , you can use
NaOH adjust the PH value |
| Particle | ≤1μ m |
Running parameter
Frequency： 50 Hz
Input Voltage： 220V AC
Output Voltage： 0 – 200 VDC
Output current： 0- 6.5A
power consumption：≤ 8 W
Working temperature： 0-45℃
Tags :
Tel : +86 13149391491
Email : jeff@hinada.com
Whatsapp ：+8613632812203
Address : High-tech Innovation Block, Suxian District, Chenzhou, Hunan, China
Copyright © 2023 Hinada Water Treatment Tech Co.,LTD All Rights Reserved.
IPv6 network supported. Design By: SWITCH2US
